Struct virtual_fs::static_file::StaticFile

source · 
pub struct StaticFile(Cursor<OwnedBuffer>);
Expand description

An immutable file backed by an [OwnedBuffer].

Tuple Fields§

§0: Cursor<OwnedBuffer>

Implementations§

source§

impl StaticFile

source

pub fn new(bytes: impl Into<OwnedBuffer>) -> Self

source

pub fn contents(&self) -> &OwnedBuffer

Access the underlying buffer.

Trait Implementations§

source§

impl AsyncRead for StaticFile

source§

fn poll_read( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &mut ReadBuf<'_>, ) -> Poll<Result<()>>

Attempts to read from the AsyncRead into buf. Read more
source§

impl AsyncSeek for StaticFile

source§

fn start_seek(self: Pin<&mut Self>, pos: SeekFrom) -> Result<()>

Attempts to seek to an offset, in bytes, in a stream. Read more
source§

fn poll_complete( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Result<u64>>

Waits for a seek operation to complete. Read more
source§

impl AsyncWrite for StaticFile

source§

fn poll_write( self: Pin<&mut Self>, _cx: &mut Context<'_>, _buf: &[u8], ) -> Poll<Result<usize>>

Attempt to write bytes from buf into the object. Read more
source§

fn poll_flush(self: Pin<&mut Self>, _cx: &mut Context<'_>) -> Poll<Result<()>>

Attempts to flush the object, ensuring that any buffered data reach their destination. Read more
source§

fn poll_shutdown( self: Pin<&mut Self>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>

Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down. Read more
§

fn poll_write_vectored( self: Pin<&mut Self>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>

Like poll_write, except that it writes from a slice of buffers. Read more
§

fn is_write_vectored(&self) -> bool

Determines if this writer has an efficient poll_write_vectored implementation. Read more
source§

impl Clone for StaticFile

source§

fn clone(&self) -> StaticFile

Returns a copy of the value. Read more
1.0.0 · source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
source§

impl Debug for StaticFile

source§

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more
source§

impl PartialEq for StaticFile

source§

fn eq(&self, other: &StaticFile) -> bool

This method tests for self and other values to be equal, and is used by ==.
1.0.0 · source§

fn ne(&self, other: &Rhs) -> bool

This method tests for !=. The default implementation is almost always sufficient, and should not be overridden without very good reason.
source§

impl VirtualFile for StaticFile

source§

fn last_accessed(&self) -> u64

the last time the file was accessed in nanoseconds as a UNIX timestamp
source§

fn last_modified(&self) -> u64

the last time the file was modified in nanoseconds as a UNIX timestamp
source§

fn created_time(&self) -> u64

the time at which the file was created in nanoseconds as a UNIX timestamp
source§

fn size(&self) -> u64

the size of the file in bytes
source§

fn set_len(&mut self, _new_size: u64) -> Result<(), FsError>

Change the size of the file, if the new_size is greater than the current size the extra bytes will be allocated and zeroed
Request deletion of the file
source§

fn poll_read_ready( self: Pin<&mut Self>, _cx: &mut Context<'_>, ) -> Poll<Result<usize>>

Polls the file for when there is data to be read
source§

fn poll_write_ready( self: Pin<&mut Self>, _cx: &mut Context<'_>, ) -> Poll<Result<usize>>

Polls the file for when it is available for writing
source§

fn set_times(&mut self, atime: Option<u64>, mtime: Option<u64>) -> Result<()>

sets accessed and modified time
source§

fn is_open(&self) -> bool

Indicates if the file is opened or closed. This function must not block Defaults to a status of being constantly open
source§

fn get_special_fd(&self) -> Option<u32>

Used for “special” files such as stdin, stdout and stderr. Always returns the same file descriptor (0, 1 or 2). Returns None on normal files
source§

fn write_from_mmap(&mut self, _offset: u64, _len: u64) -> Result<()>

Writes to this file using an mmap offset and reference (this method only works for mmap optimized file systems)
source§

fn copy_reference( &mut self, src: Box<dyn VirtualFile + Send + Sync + 'static>, ) -> BoxFuture<'_, Result<()>>

This method will copy a file from a source to this destination where the default is to do a straight byte copy however file system implementors may optimize this to do a zero copy
source§

impl StructuralPartialEq for StaticFile

Auto Trait Implementations§

Blanket Implementations§

source§

impl<T> Any for T
where T: 'static + ?Sized,

source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
§

impl<R> AsyncReadExt for R
where R: AsyncRead + ?Sized,

§

fn chain<R>(self, next: R) -> Chain<Self, R>
where Self: Sized, R: AsyncRead,

Creates a new AsyncRead instance that chains this stream with next. Read more
§

fn read<'a>(&'a mut self, buf: &'a mut [u8]) -> Read<'a, Self>
where Self: Unpin,

Pulls some bytes from this source into the specified buffer, returning how many bytes were read. Read more
§

fn read_buf<'a, B>(&'a mut self, buf: &'a mut B) -> ReadBuf<'a, Self, B>
where Self: Unpin, B: BufMut + ?Sized,

Pulls some bytes from this source into the specified buffer, advancing the buffer’s internal cursor. Read more
§

fn read_exact<'a>(&'a mut self, buf: &'a mut [u8]) -> ReadExact<'a, Self>
where Self: Unpin,

Reads the exact number of bytes required to fill buf. Read more
§

fn read_u8(&mut self) -> ReadU8<&mut Self>
where Self: Unpin,

Reads an unsigned 8 bit integer from the underlying reader. Read more
§

fn read_i8(&mut self) -> ReadI8<&mut Self>
where Self: Unpin,

Reads a signed 8 bit integer from the underlying reader. Read more
§

fn read_u16(&mut self) -> ReadU16<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i16(&mut self) -> ReadI16<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u32(&mut self) -> ReadU32<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i32(&mut self) -> ReadI32<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u64(&mut self) -> ReadU64<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i64(&mut self) -> ReadI64<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in big-endian order from the underlying reader. Read more
§

fn read_u128(&mut self) -> ReadU128<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in big-endian order from the underlying reader. Read more
§

fn read_i128(&mut self) -> ReadI128<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in big-endian order from the underlying reader. Read more
§

fn read_f32(&mut self) -> ReadF32<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in big-endian order from the underlying reader. Read more
§

fn read_f64(&mut self) -> ReadF64<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in big-endian order from the underlying reader. Read more
§

fn read_u16_le(&mut self) -> ReadU16Le<&mut Self>
where Self: Unpin,

Reads an unsigned 16-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i16_le(&mut self) -> ReadI16Le<&mut Self>
where Self: Unpin,

Reads a signed 16-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u32_le(&mut self) -> ReadU32Le<&mut Self>
where Self: Unpin,

Reads an unsigned 32-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i32_le(&mut self) -> ReadI32Le<&mut Self>
where Self: Unpin,

Reads a signed 32-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u64_le(&mut self) -> ReadU64Le<&mut Self>
where Self: Unpin,

Reads an unsigned 64-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i64_le(&mut self) -> ReadI64Le<&mut Self>
where Self: Unpin,

Reads an signed 64-bit integer in little-endian order from the underlying reader. Read more
§

fn read_u128_le(&mut self) -> ReadU128Le<&mut Self>
where Self: Unpin,

Reads an unsigned 128-bit integer in little-endian order from the underlying reader. Read more
§

fn read_i128_le(&mut self) -> ReadI128Le<&mut Self>
where Self: Unpin,

Reads an signed 128-bit integer in little-endian order from the underlying reader. Read more
§

fn read_f32_le(&mut self) -> ReadF32Le<&mut Self>
where Self: Unpin,

Reads an 32-bit floating point type in little-endian order from the underlying reader. Read more
§

fn read_f64_le(&mut self) -> ReadF64Le<&mut Self>
where Self: Unpin,

Reads an 64-bit floating point type in little-endian order from the underlying reader. Read more
§

fn read_to_end<'a>(&'a mut self, buf: &'a mut Vec<u8>) -> ReadToEnd<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, placing them into buf. Read more
§

fn read_to_string<'a>( &'a mut self, dst: &'a mut String, ) -> ReadToString<'a, Self>
where Self: Unpin,

Reads all bytes until EOF in this source, appending them to buf. Read more
§

fn take(self, limit: u64) -> Take<Self>
where Self: Sized,

Creates an adaptor which reads at most limit bytes from it. Read more
§

impl<S> AsyncSeekExt for S
where S: AsyncSeek + ?Sized,

§

fn seek(&mut self, pos: SeekFrom) -> Seek<'_, Self>
where Self: Unpin,

Creates a future which will seek an IO object, and then yield the new position in the object and the object itself. Read more
§

fn rewind(&mut self) -> Seek<'_, Self>
where Self: Unpin,

Creates a future which will rewind to the beginning of the stream. Read more
§

fn stream_position(&mut self) -> Seek<'_, Self>
where Self: Unpin,

Creates a future which will return the current seek position from the start of the stream. Read more
§

impl<W> AsyncWriteExt for W
where W: AsyncWrite + ?Sized,

§

fn write<'a>(&'a mut self, src: &'a [u8]) -> Write<'a, Self>
where Self: Unpin,

Writes a buffer into this writer, returning how many bytes were written. Read more
§

fn write_vectored<'a, 'b>( &'a mut self, bufs: &'a [IoSlice<'b>], ) -> WriteVectored<'a, 'b, Self>
where Self: Unpin,

Like write, except that it writes from a slice of buffers. Read more
§

fn write_buf<'a, B>(&'a mut self, src: &'a mut B) -> WriteBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Writes a buffer into this writer, advancing the buffer’s internal cursor. Read more
§

fn write_all_buf<'a, B>( &'a mut self, src: &'a mut B, ) -> WriteAllBuf<'a, Self, B>
where Self: Sized + Unpin, B: Buf,

Attempts to write an entire buffer into this writer. Read more
§

fn write_all<'a>(&'a mut self, src: &'a [u8]) -> WriteAll<'a, Self>
where Self: Unpin,

Attempts to write an entire buffer into this writer. Read more
§

fn write_u8(&mut self, n: u8) -> WriteU8<&mut Self>
where Self: Unpin,

Writes an unsigned 8-bit integer to the underlying writer. Read more
§

fn write_i8(&mut self, n: i8) -> WriteI8<&mut Self>
where Self: Unpin,

Writes a signed 8-bit integer to the underlying writer. Read more
§

fn write_u16(&mut self, n: u16) -> WriteU16<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i16(&mut self, n: i16) -> WriteI16<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u32(&mut self, n: u32) -> WriteU32<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i32(&mut self, n: i32) -> WriteI32<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u64(&mut self, n: u64) -> WriteU64<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i64(&mut self, n: i64) -> WriteI64<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in big-endian order to the underlying writer. Read more
§

fn write_u128(&mut self, n: u128) -> WriteU128<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in big-endian order to the underlying writer. Read more
§

fn write_i128(&mut self, n: i128) -> WriteI128<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in big-endian order to the underlying writer. Read more
§

fn write_f32(&mut self, n: f32) -> WriteF32<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in big-endian order to the underlying writer. Read more
§

fn write_f64(&mut self, n: f64) -> WriteF64<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in big-endian order to the underlying writer. Read more
§

fn write_u16_le(&mut self, n: u16) -> WriteU16Le<&mut Self>
where Self: Unpin,

Writes an unsigned 16-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i16_le(&mut self, n: i16) -> WriteI16Le<&mut Self>
where Self: Unpin,

Writes a signed 16-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u32_le(&mut self, n: u32) -> WriteU32Le<&mut Self>
where Self: Unpin,

Writes an unsigned 32-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i32_le(&mut self, n: i32) -> WriteI32Le<&mut Self>
where Self: Unpin,

Writes a signed 32-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u64_le(&mut self, n: u64) -> WriteU64Le<&mut Self>
where Self: Unpin,

Writes an unsigned 64-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i64_le(&mut self, n: i64) -> WriteI64Le<&mut Self>
where Self: Unpin,

Writes an signed 64-bit integer in little-endian order to the underlying writer. Read more
§

fn write_u128_le(&mut self, n: u128) -> WriteU128Le<&mut Self>
where Self: Unpin,

Writes an unsigned 128-bit integer in little-endian order to the underlying writer. Read more
§

fn write_i128_le(&mut self, n: i128) -> WriteI128Le<&mut Self>
where Self: Unpin,

Writes an signed 128-bit integer in little-endian order to the underlying writer. Read more
§

fn write_f32_le(&mut self, n: f32) -> WriteF32Le<&mut Self>
where Self: Unpin,

Writes an 32-bit floating point type in little-endian order to the underlying writer. Read more
§

fn write_f64_le(&mut self, n: f64) -> WriteF64Le<&mut Self>
where Self: Unpin,

Writes an 64-bit floating point type in little-endian order to the underlying writer. Read more
§

fn flush(&mut self) -> Flush<'_, Self>
where Self: Unpin,

Flushes this output stream, ensuring that all intermediately buffered contents reach their destination. Read more
§

fn shutdown(&mut self) -> Shutdown<'_, Self>
where Self: Unpin,

Shuts down the output stream, ensuring that the value can be dropped cleanly. Read more
source§

impl<T> Borrow<T> for T
where T: ?Sized,

source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
source§

impl<T> CloneToUninit for T
where T: Clone,

source§

default unsafe fn clone_to_uninit(&self, dst: *mut T)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
source§

impl<T> From<T> for T

source§

fn from(t: T) -> T

Returns the argument unchanged.

§

impl<T> Instrument for T

§

fn instrument(self, span: Span) -> Instrumented<Self>

Instruments this type with the provided [Span], returning an Instrumented wrapper. Read more
§

fn in_current_span(self) -> Instrumented<Self>

Instruments this type with the current Span, returning an Instrumented wrapper. Read more
source§

impl<T, U> Into<U> for T
where U: From<T>,

source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

§

impl<T> Pointable for T

§

const ALIGN: usize = _

The alignment of pointer.
§

type Init = T

The type for initializers.
§

unsafe fn init(init: <T as Pointable>::Init) -> usize

Initializes a with the given initializer. Read more
§

unsafe fn deref<'a>(ptr: usize) -> &'a T

Dereferences the given pointer. Read more
§

unsafe fn deref_mut<'a>(ptr: usize) -> &'a mut T

Mutably dereferences the given pointer. Read more
§

unsafe fn drop(ptr: usize)

Drops the object pointed to by the given pointer. Read more
source§

impl<T> Same for T

§

type Output = T

Should always be Self
source§

impl<T> ToOwned for T
where T: Clone,

§

type Owned = T

The resulting type after obtaining ownership.
source§

fn to_owned(&self) -> T

Creates owned data from borrowed data, usually by cloning. Read more
source§

fn clone_into(&self, target: &mut T)

Uses borrowed data to replace owned data, usually by cloning. Read more
source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

§

type Error = Infallible

The type returned in the event of a conversion error.
source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.
source§

impl<T> Upcastable for T
where T: Any + Debug + 'static,

source§

fn upcast_any_ref(&self) -> &(dyn Any + 'static)

source§

fn upcast_any_mut(&mut self) -> &mut (dyn Any + 'static)

source§

fn upcast_any_box(self: Box<T>) -> Box<dyn Any>

§

impl<T> WithSubscriber for T

§

fn with_subscriber<S>(self, subscriber: S) -> WithDispatch<Self>
where S: Into<Dispatch>,

Attaches the provided Subscriber to this type, returning a [WithDispatch] wrapper. Read more
§

fn with_current_subscriber(self) -> WithDispatch<Self>

Attaches the current default Subscriber to this type, returning a [WithDispatch] wrapper. Read more