Trait wasmer_wasix::runners::dproxy::hyper_proxy::AsyncWrite
pub(in runners::dproxy) trait AsyncWrite {
// Required methods
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, Error>>;
fn poll_flush(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Result<(), Error>>;
fn poll_shutdown(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Result<(), Error>>;
// Provided methods
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<Result<usize, Error>> { ... }
fn is_write_vectored(&self) -> bool { ... }
}Expand description
Writes bytes asynchronously.
The trait inherits from std::io::Write and indicates that an I/O object is
nonblocking. All non-blocking I/O objects must return an error when
bytes cannot be written instead of blocking the current thread.
Specifically, this means that the poll_write function will return one of
the following:
-
Poll::Ready(Ok(n))means thatnbytes of data was immediately written. -
Poll::Pendingmeans that no data was written from the buffer provided. The I/O object is not currently writable but may become writable in the future. Most importantly, the current future’s task is scheduled to get unparked when the object is writable. This means that likeFuture::pollyou’ll receive a notification when the I/O object is writable again. -
Poll::Ready(Err(e))for other errors are standard I/O errors coming from the underlying object.
This trait importantly means that the write method only works in
the context of a future’s task. The object may panic if used outside of a task.
Note that this trait also represents that the Write::flush method
works very similarly to the write method, notably that Ok(()) means that the
writer has successfully been flushed, a “would block” error means that the
current task is ready to receive a notification when flushing can make more
progress, and otherwise normal errors can happen as well.
Utilities for working with AsyncWrite values are provided by
AsyncWriteExt.
Required Methods§
fn poll_write(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, Error>>
fn poll_write( self: Pin<&mut Self>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
Attempt to write bytes from buf into the object.
On success, returns Poll::Ready(Ok(num_bytes_written)). If successful,
then it must be guaranteed that n <= buf.len(). A return value of 0
typically means that the underlying object is no longer able to accept
bytes and will likely not be able to in the future as well, or that the
buffer provided is empty.
If the object is not ready for writing, the method returns
Poll::Pending and arranges for the current task (via
cx.waker()) to receive a notification when the object becomes
writable or is closed.
fn poll_flush(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Result<(), Error>>
fn poll_flush( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
Attempts to flush the object, ensuring that any buffered data reach their destination.
On success, returns Poll::Ready(Ok(())).
If flushing cannot immediately complete, this method returns
Poll::Pending and arranges for the current task (via
cx.waker()) to receive a notification when the object can make
progress towards flushing.
fn poll_shutdown(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut Self>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
Initiates or attempts to shut down this writer, returning success when the I/O connection has completely shut down.
This method is intended to be used for asynchronous shutdown of I/O
connections. For example this is suitable for implementing shutdown of a
TLS connection or calling TcpStream::shutdown on a proxied connection.
Protocols sometimes need to flush out final pieces of data or otherwise
perform a graceful shutdown handshake, reading/writing more data as
appropriate. This method is the hook for such protocols to implement the
graceful shutdown logic.
This shutdown method is required by implementers of the
AsyncWrite trait. Wrappers typically just want to proxy this call
through to the wrapped type, and base types will typically implement
shutdown logic here or just return Ok(().into()). Note that if you’re
wrapping an underlying AsyncWrite a call to shutdown implies that
transitively the entire stream has been shut down. After your wrapper’s
shutdown logic has been executed you should shut down the underlying
stream.
Invocation of a shutdown implies an invocation of flush. Once this
method returns Ready it implies that a flush successfully happened
before the shutdown happened. That is, callers don’t need to call
flush before calling shutdown. They can rely that by calling
shutdown any pending buffered data will be written out.
§Return value
This function returns a Poll<io::Result<()>> classified as such:
-
Poll::Ready(Ok(()))- indicates that the connection was successfully shut down and is now safe to deallocate/drop/close resources associated with it. This method means that the current task will no longer receive any notifications due to this method and the I/O object itself is likely no longer usable. -
Poll::Pending- indicates that shutdown is initiated but could not complete just yet. This may mean that more I/O needs to happen to continue this shutdown operation. The current task is scheduled to receive a notification when it’s otherwise ready to continue the shutdown operation. When woken up this method should be called again. -
Poll::Ready(Err(e))- indicates a fatal error has happened with shutdown, indicating that the shutdown operation did not complete successfully. This typically means that the I/O object is no longer usable.
§Errors
This function can return normal I/O errors through Err, described
above. Additionally this method may also render the underlying
Write::write method no longer usable (e.g. will return errors in the
future). It’s recommended that once shutdown is called the
write method is no longer called.
§Panics
This function will panic if not called within the context of a future’s task.
Provided Methods§
fn poll_write_vectored(
self: Pin<&mut Self>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut Self>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
Like poll_write, except that it writes from a slice of buffers.
Data is copied from each buffer in order, with the final buffer
read from possibly being only partially consumed. This method must
behave as a call to write with the buffers concatenated would.
The default implementation calls poll_write with either the first nonempty
buffer provided, or an empty one if none exists.
On success, returns Poll::Ready(Ok(num_bytes_written)).
If the object is not ready for writing, the method returns
Poll::Pending and arranges for the current task (via
cx.waker()) to receive a notification when the object becomes
writable or is closed.
§Note
This should be implemented as a single “atomic” write action. If any data has been partially written, it is wrong to return an error or pending.
fn is_write_vectored(&self) -> bool
fn is_write_vectored(&self) -> bool
Determines if this writer has an efficient poll_write_vectored
implementation.
If a writer does not override the default poll_write_vectored
implementation, code using it may want to avoid the method all together
and coalesce writes into a single buffer for higher performance.
The default implementation returns false.
Implementations on Foreign Types§
§impl AsyncWrite for Vec<u8>
impl AsyncWrite for Vec<u8>
fn poll_write( self: Pin<&mut Vec<u8>>, _cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut Vec<u8>>, _: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
fn poll_flush( self: Pin<&mut Vec<u8>>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut Vec<u8>>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for ArcBoxFile
impl AsyncWrite for ArcBoxFile
fn poll_write( self: Pin<&mut ArcBoxFile>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut ArcBoxFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut ArcBoxFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut ArcBoxFile>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for BufferFile
impl AsyncWrite for BufferFile
fn poll_write( self: Pin<&mut BufferFile>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut BufferFile>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut BufferFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut BufferFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for CombineFile
impl AsyncWrite for CombineFile
fn poll_write( self: Pin<&mut CombineFile>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut CombineFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut CombineFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for CopyOnWriteFile
impl AsyncWrite for CopyOnWriteFile
fn poll_write( self: Pin<&mut CopyOnWriteFile>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut CopyOnWriteFile>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut CopyOnWriteFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut CopyOnWriteFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for DeviceFile
impl AsyncWrite for DeviceFile
fn poll_write( self: Pin<&mut DeviceFile>, _cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut DeviceFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut DeviceFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut DeviceFile>, _cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for DualWriteFile
impl AsyncWrite for DualWriteFile
fn poll_write( self: Pin<&mut DualWriteFile>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut DualWriteFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut DualWriteFile>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for File
impl AsyncWrite for File
fn poll_write( self: Pin<&mut File>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut File>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut File>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut File>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for NullFile
impl AsyncWrite for NullFile
fn poll_write( self: Pin<&mut NullFile>, _cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut NullFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut NullFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut NullFile>, _cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for PipeTx
impl AsyncWrite for PipeTx
§impl AsyncWrite for RandomFile
impl AsyncWrite for RandomFile
fn poll_write( self: Pin<&mut RandomFile>, _cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut RandomFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut RandomFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut RandomFile>, _cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for StaticFile
impl AsyncWrite for StaticFile
fn poll_write( self: Pin<&mut StaticFile>, _cx: &mut Context<'_>, _buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut StaticFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut StaticFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for Stderr
impl AsyncWrite for Stderr
§impl AsyncWrite for Stdin
impl AsyncWrite for Stdin
§impl AsyncWrite for Stdout
impl AsyncWrite for Stdout
§impl AsyncWrite for TcpSocketHalfTx
impl AsyncWrite for TcpSocketHalfTx
fn poll_write( self: Pin<&mut TcpSocketHalfTx>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut TcpSocketHalfTx>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut TcpSocketHalfTx>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl AsyncWrite for Upgraded
impl AsyncWrite for Upgraded
fn poll_write( self: Pin<&mut Upgraded>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut Upgraded>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut Upgraded>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut Upgraded>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn is_write_vectored(&self) -> bool
§impl AsyncWrite for WebCFile
impl AsyncWrite for WebCFile
§impl AsyncWrite for ZeroFile
impl AsyncWrite for ZeroFile
fn poll_write( self: Pin<&mut ZeroFile>, _cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
fn poll_flush( self: Pin<&mut ZeroFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut ZeroFile>, _cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_write_vectored( self: Pin<&mut ZeroFile>, _cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
fn is_write_vectored(&self) -> bool
§impl<IO> AsyncWrite for TlsStream<IO>where
IO: AsyncRead + AsyncWrite + Unpin,
impl<IO> AsyncWrite for TlsStream<IO>where
IO: AsyncRead + AsyncWrite + Unpin,
§fn poll_write(
self: Pin<&mut TlsStream<IO>>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, Error>>
fn poll_write( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
Note: that it does not guarantee the final data to be sent.
To be cautious, you must manually call flush.
§fn poll_write_vectored(
self: Pin<&mut TlsStream<IO>>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
Note: that it does not guarantee the final data to be sent.
To be cautious, you must manually call flush.
fn is_write_vectored(&self) -> bool
fn poll_flush( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
fn poll_shutdown( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, ) -> Poll<Result<(), Error>>
§impl<IO> AsyncWrite for TlsStream<IO>where
IO: AsyncRead + AsyncWrite + Unpin,
impl<IO> AsyncWrite for TlsStream<IO>where
IO: AsyncRead + AsyncWrite + Unpin,
§fn poll_write(
self: Pin<&mut TlsStream<IO>>,
cx: &mut Context<'_>,
buf: &[u8],
) -> Poll<Result<usize, Error>>
fn poll_write( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, buf: &[u8], ) -> Poll<Result<usize, Error>>
Note: that it does not guarantee the final data to be sent.
To be cautious, you must manually call flush.
§fn poll_write_vectored(
self: Pin<&mut TlsStream<IO>>,
cx: &mut Context<'_>,
bufs: &[IoSlice<'_>],
) -> Poll<Result<usize, Error>>
fn poll_write_vectored( self: Pin<&mut TlsStream<IO>>, cx: &mut Context<'_>, bufs: &[IoSlice<'_>], ) -> Poll<Result<usize, Error>>
Note: that it does not guarantee the final data to be sent.
To be cautious, you must manually call flush.